Ancor mini plates consist of a plate attached to the bone and a flat attachment tail as a continuation of this plate. During application to the bone, both the plate part and the attachment tail can be easily and safely shaped.
Ancor mini plates are manufactured in different forms to be placed in the zygomatic bone, lower and upper jaw base, nasal cavity or alveolar bone region.
Ancor mini plates are designed in 5 different forms as Straight, Y, T, L and Mentoplate. In all mini plates, the plate and the attachment tail are manufactured as a single piece in order to minimize the possibility of breakage.
Two Hole Straight Plate (SP-2)
-
Thickness-Length 0.8 mm x 40 mm
Three Hole Straight Plate (SP-3)
-
Thickness-Length 0.8 mm x 40 mm
Four Hole Straight Plate (SP-4)
-
Thickness-Length 0.8 mm x 40 mm
Three Hole Y Plate (YP-3)
-
Thickness-Length 0.8 mm x 40 mm
Four Hole Y Plate (YP-4)
-
Thickness-Length 0.8 mm x 40 mm
Four Hole T Plate (TP-4)
-
Thickness-Length 0.8 mm x 40 mm
Five Hole T Plate (TP-5)
-
Thickness-Length 0.8 mm x 40 mm
Two Hole L Plate-Right
(LP-2-R)
-
Thickness 1 mm
Two Hole L Plate-Left
(LP-2-L)
-
Thickness 1 mm
Three Hole L Plate-Right
(LP-3-R)
-
Thickness 1 mm
Three Hole L Plate-Left
(LP-3-L)
-
Thickness 1 mm
Three Hole Mentoplate (MP-3)
-
Thickness 1 mm
Four Hole Mentoplate (MP-4)
-
Thickness 1 mm
With a Bar Mentoplate (MP-Bar)
-
Thickness 1 mm
Mini Plate Screws
-
Code Thickness & Length
-
FS2.0-5-Ti 2.0 x 5 mm
-
FS2.0-6-Ti 2.0 x 6 mm
-
FS2.0-7-Ti 2.0 x 7 mm
-
FS2.0-8-Ti 2.0 x 8 mm
-
FS2.0-9-Ti 2.0 x 9 mm
-
FS2.0-10-Ti 2.0 x 10 mm
-
Code Thickness & Length
-
FS2.2-5-Ti 2.2 x 5 mm
-
FS2.2-6-Ti 2.2 x 6 mm
-
FS2.2-7-Ti 2.2 x 7 mm
-
FS2.2-8-Ti 2.2 x 8 mm
-
FS2.2-9-Ti 2.2 x 9 mm
-
FS2.2-10-Ti 2.2 x 10 mm
Products required for application
The products required for mini plate application are listed below. However, if a contra-angle handpiece is to be used, a 20-25 and 30 mm long contra-angle handpiece tip is required. A physiodispenser is required for this. At the same time, a set box can be added optionally to assist with sterilization and to store the products.
